Precision Ballistics LLC
precisionballisticsllc.com

Here are pictures and descriptions of my 6.5mm (.264") bullets.

DSCF3225.JPGDSCF3226.JPGDSCF3223.JPGDSCF3198.JPGDSCF3199.JPG

110gr 6.5mm. This bullet is a wonderful choice for shooting 200-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 9.5".

115gr 6.5mm. This bullet is a wonderful choice for shooting 200-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 9.5".

123gr 6.5mm. This bullet is a wonderful choice for shooting 300-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 9".

130gr 6.5mm. This bullet is a wonderful choice for shooting 600-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 9".

139gr 6.5mm. This bullet is a wonderful choice for shooting 600-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 8.5".

Here are my 6.5mm (.264") bullets! They are built from precision jackets and 99.95% pure lead and 0.05% antimony cores, carefully put through my new carbide Detsch dies and finished with my new Hoover 6.5mm tipping die. These are really sweet looking projectiles! They have a 15 tangent ogive and 0.200"x10 degree boat tail. I close the meplat as close as I can to about 0.005", but can make the hole up to 0.060" for hunting!

Please note: I now have all materials to build 6.5mm bullets in 110gr, 115gr and 123gr, but am still waiting for jackets to build my 130gr, 136gr, 139gr and 142gr 6.5mm bullets.

142gr 6.5mm. This bullet is a wonderful choice for shooting 600-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 8.5".

142.JPGPTDC0165.JPG

Here is a picture of my 110gr 6.5mm FB bullets. I build my 110gr, 115gr and 123gr with 1.180" jackets. These jackets only make a pressure ring around 0.0004-6" over the 0.264" bearing surface.

PTDC0173.JPG

Here is a picture of my 123gr 6.5mm FB bullets. I build my 110gr, 115gr and 123gr with 1.180" jackets. These jackets only make a pressure ring around 0.0004-6" over the 0.264" bearing surface.

DSCF3188.JPG

136gr 6.5mm. This bullet is a wonderful choice for shooting 600-1000 yards for benchrest or hunting. It is available in 15 tangent ogive, 0.025" meplat, and 0.200" x 10 degree boat tail. Recommended twist rate is 8.5".

142fb.JPG139fb.JPG115fb.JPG130fb.JPG136fb.JPG

Here is a picture of my 115gr 6.5mm FB bullets. I build my 110gr, 115gr and 123gr with 1.180" jackets. These jackets only make a pressure ring around 0.0004-6" over the 0.264" bearing surface.

Here is a picture of my 130gr 6.5mm FB bullets. The process of forming this style makes a pressure ring 0.265" which quickly goes down to 0.264". I use the 1.325" jacket on 130gr on up.

Here is a picture of my 136gr 6.5mm FB bullets. The process of forming this style makes a pressure ring 0.265" which quickly goes down to 0.264". I use the 1.325" jacket on 130gr on up.

Here is a picture of my 139gr 6.5mm FB bullets. The process of forming this style makes a pressure ring 0.265" which quickly goes down to 0.264". I use the 1.325" jacket on 130gr on up.

Here is a picture of my 142gr 6.5mm FB bullets. The process of forming this style makes a pressure ring 0.265" which quickly goes down to 0.264".I use the 1.325" jacket on 130gr on up.