Welcome to Precision Ballistics LLC!

Serious benchrest bullets for serious competitors !!!!
Home     My Bullets     How They're Made     Comments and Pictures     FAQ     Order     Contact     Memberships/Links     Privacy     Ballistic Gel      
 

 
Bullet Photos:

 

























Notice an empty J4 jacket, a lead core, a seated jacket, five of my flat base 66gr. bullets and one of the targets I shot.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



























Here are my flat base 66gr. 6mm bullets with a 6/9 double radius ogive. The diameter at the bearing surface is 0.24300" and at the pressure ring it is 0.24350". Recommended twist 14".
 


 


 

 

 

 

 
 
 
 
 
 
 
 
 
 
 






















My 66gr BT bullets. These pills are HOT! Recommended twist 14".

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 




















Here are some of my 68gr. 6mm flat base, open tip bullets with a 6/9

double radius ogive. Recommended twist 14".

 
 
 
 
 
 
 
 


 

 
 
 
 
 
 
 
 




















A picture if some of my 68gr BT 6mm bullets with 6/9 double radius ogive. Recommended twist 14".
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 
 
 
 
 
 























Here are some of my 74gr FB bullets. Recommended twist 13.5".

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
























Here are a few of my 74gr BTs drying, following their ultrasonic cleaning. Recommended twist 13.5".
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

























Some of my 80gr FB 6mm bullets. Recommended twist 12".
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 






















My 80gr BT bullets are extremely accurate. My short boat tail, I use on 66gr through 88gr is 0.06200" by 14 degrees. Recommended twist is 12".

 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

























Here are my 85gr FB bullets. Recommended twist 10".
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 






















My 85gr BT bullet. It has the 6/9 double radius ogive, 0.06400" meplat, and 14 degrees by 0.06200" slightly rebated boat tail. Recommended twist 10".

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 






















Here are some of my 88gr FB bullets. Recommended twist 10".

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 





















Here are some of my 6mm, 88gr. boat tail, open tip bullets with a 6/9 double radius ogive drying after their ultrasonic bath. Recommended twist 10".
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

Here are a few of my 90gr flat base 6mm bullets drying under a fan after coming out of my ultrasonic cleaner.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Next step is the QC bench, followed by packaging and shipping. Recommended twist 10".

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

























These are my  90gr  Boat Tail bullets. The boat tail is 0.17500" x 10 degrees rather than 0.06200" x 14 degrees. I use this boat tail for my bullets 90gr and heavier. Recommended twist 10".
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 




















My  90gr VLD bullets. The boat tail is 0.17500" x 10 degrees. The bearing surface is 0.24300" and the pressure ring is 0.24350". Both my HVLDs and TVLDs go through my Hoover tipping die. HVLDs are made with standard J4 jackets while TVLDs are made with thick wall J4s. Recommended twist 10".
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 


















Here are some of my 6mm 95gr flat base bullets with their 6/9 double radius. Recommended twist 9".
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 





















These are my 95gr Boat Tail bullets. The boat tail is 0.17500" x 10 degrees rather than 0.06200" x 14 degrees. Recommended twist 9".
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


 

 




















Here are my 95gr VLDs.  My HVLDs are built with standard J4 jackets. My TVLDs are built with thick wall J4s. Recommended twist of 9".
 

 

































Here are my 103gr VLDs. I build my 103gr HVLDs with standard J4 jackets and my TVLDs with thick wall J4s.  Recommended twist is 103gr is 8".











































Here are my 105gr VLDs. I build the HVLDs with standard J4 jackets and my TVLDs with thick wall J4s.  Recommended twist is 8".













































Here are my 108gr VLDs. I build the HVLDs with standard J4 jackets and my TVLDs with thick wall J4s.  Recommended twist is 8".














 































Here are my 113gr VLDs. I build the HVLDs with standard J4 jackets and my TVLDs with thick wall J4s.  Recommended twist is 7".





















































Here are my 115gr VLDs. I build the HVLDs with standard J4 jackets and my TVLDs with thick wall J4s.  Recommended twist is 7".