Welcome to Precision Ballistics LLC!

Serious benchrest bullets for serious competitors !!!!
Home     About     Swaging     Comments and Pictures     FAQ     Order     Tax     Contact     Memberships/Links     Privacy     Ballistic Gel      
 

 
About Us:
 
It is Precision Ballistic's mission to design and HAND-swage the most precise world-class 6mm custom bullets possible for the benchrest shooting community. Precision Ballistics LLC is a company manufacturing precision custom benchrest bullets. I have been shooting and reloading for over 25 years. My desire to manufacture precision bullets has now been realized by establishing this firm. Precision Ballistics LLC is a one person enterprise which allows me to have total control over the quality control of my products. I manufacture and QC each bullet one at a time by HAND.  I make them like I would want them made if I bought them. Please order in advance so you will have plenty for the whole season. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

My name is Don Lahr, and my moniker on the shooting forums is "Bughole".  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I like to shoot my 6mmBR at 100, 200, 300, 400, 500 and 600 yards. At 100 yards I shoot at a sheet of printer paper with 20 yellow 5/8" targets per page, which I make on my computer (example of one such target below). In case you're wondering why I didn't hit the center of the target in the picture, I adjust my windage and elevation just a little off of the 1/8" black center dot to allow me to maintain my point of aim (POA). In this case I want my point of aim and point of impact to be just a little bit different. Once you shoot away your POA it is harder to have a precise POI. Here is one where I put five bullets through the same hole,  which measured 0.292" at the widest. Subtract 0.243" for the diameter of the bullets shot, and you get a 0.049" group. You may be able to beat this one. Try my bullets and see what you can do with them!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

Notice an empty J4 jacket, a lead core, a seated jacket, five of my flat base 66gr. bullets and one of the targets I shot.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here is one of my finished VLDs on the left and one of my VLDs ready for the tipping die on the right.  I make 90gr, 95gr, 103gr, 105gr, 108gr, 113gr and 115gr VLDs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here is a picture of my 66gr. 6mm, flat base bullets with a 6/9 double radius ogive, which have had their meplats uniformed and countersunk.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are my flat base 66gr. 6mm bullets with a 6/9 double radius ogive straight out of the ultrasonic cleaner full of Lenium GS. No uniforming or countersinking has been done to these bullets. Recommended twist 14".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

My 66gr BT bullets. These pills are HOT! Recommended twist 14".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are some of my 68gr. 6mm flat base, open tip bullets with a 6/9

double radius ogive. Recommended twist 13.5".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

A picture if some of my 68gr BT 6mm bullets with 6/9 double radius ogive. Recommended twist 13.5".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are some of my 74gr FB bullets. Recommended twist 13.5".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are a few of my 74gr BTs drying, following their ultrasonic cleaning. Recommended twist 13.5".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Some of my 80gr FB 6mm bullets. Recommended twist 12".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are my 80gr BT 6mm bullets. Recommended twist 12".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are my 85gr FB bullets. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

My 85gr BT bullet. It has the 6/9 double radius ogive, 0.064" meplat, and 14 degrees by 0.062" slightly rebated boat tail. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are some of my 88gr FB bullets. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

Here are some of my 6mm, 88gr. boat tail, open tip bullets with a 6/9 double radius ogive drying after their Lenium GS ultrasonic bath. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These are my new 88gr Long Boat Tail bullets. They are the same as my short boat tails except the boat tail is 0.175" x 10 degrees rather than 0.062" x 14 degrees. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are a few of my 90gr flat base 6mm bullets drying under a fan after coming out of my ultrasonic cleaner.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Next step is the QC bench, followed by packaging and shipping. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are some of my 6mm 90gr boat tail bullets aerating after coming out of the ultrasonic cleaner. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These are my new 90gr Long Boat Tail bullets. They are the same as my short boat tails except the boat tail is 0.175" x 10 degrees rather than 0.062" x 14 degrees. Recommended twist 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are some of my 6mm 95gr flat base bullets with their 6/9 double radius. Recommended twist 9".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are my 6mm 95gr boat tail bullets letting the Lenium GS ultrasonic cleaner degreaser aerate. Recommended twist 9".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These are my new 95gr Long Boat Tail bullets. They are the same as my short boat tails except the boat tail is 0.175" x 10 degrees rather than 0.062" x 14 degrees. Recommended twist 9".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The following photos are of what I used to call my Target VLDs but I have changed these to be my Hunting VLDs because they use the standard J4 jackets. I am getting re-tooled to build the same bullets only with the thick wall J4 jackets, and I will call those my Target VLDs. Pictures will be posted after I make them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A photo of my 90gr Hunting VLDs. My Hunting VLDs are the same bullet as my Target VLDs except they are built with standard J4 jackets. Recommended twist rate is 10".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are my 95gr Hunting VLDs. Both my 90gr and 95gr VLDs are built with 1.050" J4 jackets. Recommended twist of 9".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

An example of my 103gr Hunting VLDs. I build my 103gr, 105gr and 108gr VLDs with 1.150" J4 jackets. Recommended twist for my 103gr is 8".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

My 105gr Hunting VLDs. All my VLDs have a tangent 15 ogive. A tangent ogive is much less finicky about seating depths as a secant ogive, so just seat them 0.005"-0.015" jammed depending on your rifle. 8" twist rate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

My 108gr Hunting VLDs buck the wind well for long ranges. My Savage likes me to jam these at 0.005". Use an 8" twist.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These are my 113gr Hunting VLDs. These buck the wind great and while I recommend a 7" twist, they stabilize fine in my Savage 8" twist barrel. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Here are the longest 6mm bullets I make, my 115gr HVLD. These buck the wind the best of all my bullets and are designed for shooting long ranges. A 7" twist is recommended.

 

 

 

 

 

 

 

 

 

At the Range
Pause Stop Previous Next View full-sized photos

Company history:

 
Precision Ballistics LLC grew from my desire to have a more perfect bullet available for benchrest and varmint shooting. I enjoy shooting at benchrest matches, as well as the VHA Jamboree, the Midwest Regional VHA Match, Eastern Regional VHA Match and the Western PA Long Range Groundhog Match. Varmint hunters require a high level of accuracy and precision as well as benchrest shooters, and dead-on long-range shooting is now possible with my bullets. My target bullets are also very "Fur-Friendly!" Whether you require light weight bullets for your 1:14" twist 6mm rifle, mid-weight bullets for your 1:12" or 1:10" twist 6mm rifle, or heavy bullets for your 1:8" twist or 1:7" twist 6mm rifle, Precision Ballistics LLC can provide the bullets you need. I now produce a VLD design bullet in 90gr, 95gr, 103gr, 105gr, 108gr, 113gr and 115gr.